ASME B16.11 Elbow
What Is A Threaded Elbow?
Screwed Elbow are different specific types of elbows. 45 Degree Threaded Elbow differ according to the standards and use cases but their angle is denoted as 45 degree for the change of direction in fluid flow. Threaded Elbow Dimensions mainly depend on the connecting pipes and the radius of the curvature. The standards differ such as the 45 Degree Npt Elbow and the Asme B16.11 Threaded Elbow Fittings. The Asme B16.11 Threaded Elbow Material can differ but the nominal sizes for this standard are up to 4 inches.
45 Degree Threaded Elbow Use In Connecting Pipes?
Threaded 45 Deg Elbow or the 45 Deg Threaded Pipe Elbow has threads to be threaded onto the connecting pipes. In contrast to the most used welding methods, these are connected by threads. Welding is also applied when necessary. The ASME B16.11 Threaded Reducing Elbow has a different function as it reduces the pipe size from one end to the other. Asme B16.11 Gi Threaded Elbow is made up of GI material which is much corrosion resistant. GI stands for galvanized iron which has a coating over the steel to prevent oxidation. Sometimes the Grooved Threaded 45 Deg Elbow types are used; these have grooves and can install gaskets for extra tightness. Internal Threaded 45 Degree Elbow has threads inside the elbow and the pipe will have threads outside to fit onto this type.
Refer Stainless Steel Threaded 45 Deg Elbow Weight Chart According to Manufacturer Of ANSI B16.11 And NPT 45 Degree Street Elbows In India.
Threaded 45 Deg Elbow Joint, Ms Threaded 45 Deg Elbow or the Stainless Steel Threaded 45 Deg Elbow could be used interchangeably. Npt Threaded Elbow comes under the national standards. Threaded Elbow Weight can differ with type and material; the Threaded Long Radius Elbow is heavier because of the longer radius. Ss Threaded 45 Degree Elbow is mostly used in low pressure systems. Short Radius Threaded 45 Degree Elbow has a shorter radius and is useful in narrow space operations. A105 Threaded 45 Degree Elbow is made up of A105 alloy and it is much corrosion resistant but the Brass Threaded 45 Degree Elbow is resistant to chloride ion corrosion cracking. In applications where the requirement mandates, the Threaded Conduit Elbow, the Gi Threaded Elbow or the type Elbow Threaded Grooved can be used.
EIL Approved Carbon Steel 45 Degree NPT Elbow Manufacturer In India, Temperature Ratings Of 45° Threaded Reducing Elbows.
Npt 45 Degree Street Elbow Brass are made up of brass to reduce corrosion and to make them low cost to be applied in low cost systems. Threaded Elbow Class 150 and the Threaded Elbow Class 3000 are two examples of their pressure classes.
ASME B16.11 Elbow Dimensions
Class 2000 Threaded 45 Elbow Dimensions
| Normal Pipe Sizes | Minimum Length of Thread |
Outside Diameter of Band |
Minimum Weight |
Center to End | |
| B | J | D | G | 45° C |
|
| 1/2 | 10.9 | 13.6 | 33 | 3.18 | 22 |
| 3/4 | 12.7 | 13.9 | 38 | 3.18 | 25 |
| 1 | 14.7 | 17.3 | 46 | 3.68 | 28 |
| 1.1/4 | 17 | 18 | 56 | 3.89 | 33 |
| 1.1/2 | 17.8 | 18.4 | 62 | 4.01 | 35 |
| 2 | 19 | 19.2 | 75 | 4.27 | 43 |
| 2.1/2 | 23.6 | 28.9 | 92 | 5.61 | 52 |
| 3 | 25.9 | 30.5 | 109 | 5.99 | 64 |
| 4 | 27.7 | 33 | 146 | 6.55 | 79 |
Class 3000 Threaded 45 Elbow Dimensions
| Normal Pipe Size | Minimum Length of Thread |
O.D. Outside Daimeter of Band |
Minimum Weight |
Center to End | |
| B | J | D | G | 45 Degree C |
|
| 1/2 | 10.9 | 13.6 | 38 | 4.09 | 25 |
| 3/4 | 12.7 | 13.9 | 46 | 4.32 | 28 |
| 1 | 14.7 | 17.3 | 56 | 4.98 | 33 |
| 1.1/4 | 17 | 18 | 62 | 5.28 | 35 |
| 1.1/2 | 17.8 | 18.4 | 75 | 5.56 | 43 |
| 2 | 19 | 19.2 | 84 | 7.14 | 44 |
| 2.1/2 | 23.6 | 28.9 | 102 | 7.65 | 52 |
| 3 | 25.9 | 30.5 | 121 | 8.84 | 64 |
| 4 | 27.7 | 33 | 152 | 11.18 | 79 |
ANSI / ASME B16.11 Screwed Elbow Available in A Wide Range Of Grades Or Shape And Material.
Class 6000 Threaded 45 Elbow Dimensions
| Normal Pipe Sizes | Minimum Length of Thread |
Outside Daimeter of Band |
Minimum Weight |
Center to End | |
| B | J | D | G | 45 Degree C |
|
| 1/2 | 10.9 | 13.6 | 46 | 8.15 | 28 |
| 3/4 | 12.7 | 13.9 | 56 | 8.53 | 33 |
| 1 | 14.7 | 17.3 | 62 | 9.93 | 35 |
| 1.1/4 | 17 | 18 | 75 | 10.59 | 43 |
| 1.1/2 | 17.8 | 18.4 | 84 | 11.07 | 44 |
| 2 | 19 | 19.2 | 102 | 12.09 | 52 |
| 2.1/2 | 23.6 | 28.9 | 121 | 15.29 | 64 |
| 3 | 25.9 | 30.5 | 146 | 16.64 | 79 |
| 4 | 27.7 | 33 | 152 | 18.67 | 79 |
Threaded 45 Deg Elbow Price List
| Size | Class | Type Material | Price In India |
| 1 NPS | 6000# | ASTM A105 | 187.47 |
| 1-1/2 NPS | 3000# | ASTM A105 | 76.89 |
| 1/2 NPS | 3000# | ASTM A105N | 78.98 |
| 3/4 NPS | 6000# | ASTM A105N | 120 |
| 2 NPS | 3000# | A06E | 260.5 |
Please note this is an approx Price of 45 Deg Threaded Elbow in India. For final ASME B16.11 Elbow Price List Please Call on +91 - 22 - 67437342 or drop an Email to info@rajtilakmetal.com.
Most Frequent Types Of NPT 3000 LBS Grooved Screwed 45 Degree Elbow, Check Market Price Before You Buy ASME B16.11 45 Degree Threaded Elbows Fittings In Mumbai, India.
Standard Specification Of Stainless Steel Threaded 45 Degree Elbow
| Specification : | 45 Degree Threaded Elbow |
| Standards | MSS SP 79, JIS B2302, MSS-SP-97 (Threadolet), MSS-SP-83 (Union), ASME B16.11 (American Standard), Bs3799, ASME B36.19 (Nipple) |
| Type Of Pipe systems | Equal Cross, Pipe Cap, Branch Outlets, Swage Nipple, 45 Deg Elbow, Equal tee, Full Coupling, Reducing Tee, 90 Deg Elbow, Half Coupling, Street Elbow, Bull Plug, Boss, Union (Male/Female), Lateral Outlet, 45 Lateral Tee. |
| Material | Stainless Steel (ASTM-182) Alloy Steel (ASTM-182) Low Alloy Steel (ASTM-350) Carbon Steel (ASTM-105) Duplex Steel Cooper Nickel |
| Thread Connections | ASME B16.34 (Valves — Flanged), ASME B16.39 (Malleable Iron Pipe Unions, 150#, 250#, Or 300#), ASME B16.11 (Socket Welding and Threaded), MSS-SP-83 (Class Unions), ASME B16.3 (Malleable Iron Fittings), ASME B16.4 ( Gray Iron Fittings), ASME B16.39 (Malleable Iron Unions). |
| Types Of Thread | NPT, BSPP, BSPT, PF, PT, MPT |
| Applications | Oil and Gas Chemical Water Pipeline Noncritical Applications Power station Fire Protection |
| Advantages | Simple Usage Easy installation Economic as cheaper |
| Size | Threaded Fittings = ½” – 4” |
| Pressure Rating | Threaded Fittings = Class 2000, Class 3000, Class 6000 |
45 Degree Npt Elbow Weight Chart
| 2000LBS | NPS | 1/8 | 1/4 | 3/8 | 1/2 | 3/4 | 1 | 1 1/4 | 1 1/2 | 2 | 2 1/2 | 3 | 4 |
| B | – | 29/32 | 1 1/16 | 1 5/16 | 1 9/16 | 1 27/32 | 2 7/32 | 2 1/2 | 3 1/32 | 3 11/16 | 4 5/16 | 5 3/4 | |
| F | – | 3/4 | 3/4 | 1 | 1 1/8 | 1 1/4 | 1 5/16 | 1 3/8 | 1 11/16 | 2 1/16 | 2 1/2 | 3 1/8 | |
| Weight | – | 0.188 | 0.236 | 0.435 | 0.740 | 1.058 | 1.375 | 1.740 | 2.883 | 7.750 | 11.313 | 19.125 | |
| 3000LBS | 1/8 | 1/4 | 3/8 | 1/2 | 3/4 | 1 | 1 1/4 | 1 1/2 | 2 | 2 1/2 | 3 | 4 | |
| B | 29/32 | 1 1/16 | 1 5/16 | 1 9/16 | 1 27/32 | 2 7/32 | 2 1/2 | 3 1/32 | 3 11/32 | 4 | 4 3/4 | 6 | |
| F | 3/4 | 3/4 | 1 | 1 1/8 | 1 1/4 | 1 5/16 | 1 3/8 | 1 11/16 | 1 3/4 | 2 1/16 | 2 1/2 | 3 1/8 | |
| Weight | 0.250 | 0.290 | 0.500 | 0.750 | 1.188 | 1.988 | 2.235 | 3.000 | 4.930 | 7.375 | 13.588 | 19.063 | |
| 6000# | 1/8 | 1/4 | 3/8 | 1/2 | 3/4 | 1 | 1 1/4 | 1 1/2 | 2 | 2 1/2 | 3 | 4 | |
| B | 1 1/6 | 1 5/16 | 1 9/16 | 1 27/32 | 2 7/32 | 2 1/2 | 3 1/32 | 3 11/32 | 4 | 4 3/4 | 5 3/4 | – | |
| F | 3/4 | 1 | 1 1/8 | 1 1/4 | 1 5/16 | 1 3/8 | 1 11/16 | 1 3/4 | 2 1/16 | 2 1/2 | 3 1/8 | – | |
| Weight | 0.250 | 0.640 | 0.500 | 1.438 | 2.188 | 2.785 | 4.688 | 5.750 | 9.500 | 15.000 | 30.563 | – | |
ASME B16.11 Threaded 45 Deg Elbow Pressure Rating
| Threaded 45 Deg Elbow Pressure-Temperature | ||||||
| Temperature | Class | |||||
| 150 | 300 | |||||
| 1/4 - 1 inch. | 1 1/4 - 2 inch. | 2 1/2 - 3 inch. | ||||
| (oF) | (oC) | |||||
| -20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 | |
| 200 | 93 | 265 | 1785 | 1350 | 910 | |
| 250 | 121 | 225 | 1575 | 1200 | 825 | |
| 300 | 149 | 185 | 1360 | 1050 | 735 | |
| 350 | 177 | 150 | 1150 | 900 | 650 | |
| 400 | 204 | - | 935 | 750 | 560 | |
| 450 | 232 | - | 725 | 600 | 475 | |
| 500 | 260 | - | 510 | 450 | 385 | |
| 550 | 288 | - | 300 | 300 | 300 | |
Screwed Elbow Tolerance Chart
| ANSI B16.11 American Standard Dimensional Tolerances | ||
| "A" - Threaded Center To Bottom | For Size 1/8" And 1/4" |
± 0.03" |
| 3/8", 1/2" And 3/4" | ± 0.06" | |
| 1", 1-1/4", 1-1/2" And 2" | ± 0.08" | |
| 2-1/2", 3", And 4" | ± 0.10" | |
| "B" - Threaded Bore Diameter | For Size 1-1/2" And Smaller |
+ 0.020" - 0.000" |
| 2", 2-1/2", 3" And 4" | + 0.025" - 0.000" |
|
| "C" - Threaded Wall Thick. | Min. = 1.09 T (But Not Less Than 5/32") T = Wall Thickness Of Nominal Pipe Sizes |
|
| "D" - Bore Diameter Of Pipe Fitting | For Size 2" And Smaller |
± 0.030" |
| 2-1/2", 3" And 4" | ± 0.060" | |
| "E" - Threadeds- Bottom To Bottom - Full Couplings | For Size 1/8" And 1/4" |
± 0.06" |
| 3/8", 1/2" And 3/4" | ± 0.12" | |
| 1", 1-1/4", 1-1/2" And 2" | ± 0.16" | |
| 2-1/2", 3", And 4" | ± 0.20" | |
| "F" - Bottom Of Threaded To Opposite Face - ANSI B16.11 Half Couplings | For Size 1/8" And 1/4" |
± 0.03" |
| 3/8", 1/2" And 3/4" | ± 0.06" | |
| 1", 1-1/4", 1-1/2" And 2" | ± 0.08" | |
| 2-1/2", 3", And 4" | ± 0.10" | |
| "G" - Gap Of Welding | Approx. 0.06" Before Welding Recommended Gap |
|
| "H" - Min. Flat | Min. Flat = 0.75 X Min. Threaded Wall Thick. |
|
Types Of 45 Degree Threaded Elbow For Sale
1 1/2 Inch, A351 CF8M, Class 150 LB, ANSI B16.11, Screwed Elbow
Class 3000, A182 F304L, 1/2 Inch, NPT, 45 Degree Threaded Elbow
ASME B16.11, 1 1/2 Inch, Class 3000, Npt 45 Deg Street Elbow Brass
2 Inch, 6000LB, A182 F11, B16.11, Threaded Reducing Elbow
1/2 Inch, 3000LB, F304H, ASME B16.11, Internal Threaded Elbow
ASTM A182 F316, 1/2 Inch, 9000LB, FNPT Ends, Threaded Long Radius Elbow
2000LB, ASME B16.11, 2 Inch, Stainless Steel Threaded Elbow
ASTM A105, 1.5 Inch, NPT Ends, Carbon Steel 45 Deg Threaded Elbows
1 inch, Threaded 125#, Black Cast Iron, Seamless 45 Deg Elbows
ASME B16.11, PN400, DN80, Brass Threaded Elbows
Galvanized, ASTM A105, CL3000, 3 Inch, ASME B16.11 45 Deg Threaded Elbows
ASTM A350 LF2, DN20, PN400, Threaded Elbows Class 3000
What Is A Threaded Elbow?
Screwed Elbow are different specific types of elbows. 45 Degree Threaded Elbow differ according to the standards and use cases but their angle is denoted as 45 degree for the change of direction in fluid flow. Threaded Elbow Dimensions mainly depend on the connecting pipes and the radius of the curvature. The standards differ such as the 45 Degree Npt Elbow and the Asme B16.11 Threaded Elbow Fittings. The Asme B16.11 Threaded Elbow Material can differ but the nominal sizes for this standard are up to 4 inches.
45 Degree Threaded Elbow Use In Connecting Pipes?
Threaded 45 Deg Elbow or the 45 Deg Threaded Pipe Elbow has threads to be threaded onto the connecting pipes. In contrast to the most used welding methods, these are connected by threads. Welding is also applied when necessary. The ASME B16.11 Threaded Reducing Elbow has a different function as it reduces the pipe size from one end to the other. Asme B16.11 Gi Threaded Elbow is made up of GI material which is much corrosion resistant. GI stands for galvanized iron which has a coating over the steel to prevent oxidation. Sometimes the Grooved Threaded 45 Deg Elbow types are used; these have grooves and can install gaskets for extra tightness. Internal Threaded 45 Degree Elbow has threads inside the elbow and the pipe will have threads outside to fit onto this type.
Refer Stainless Steel Threaded 45 Deg Elbow Weight Chart According to Manufacturer Of ANSI B16.11 And NPT 45 Degree Street Elbows In India.
Threaded 45 Deg Elbow Joint, Ms Threaded 45 Deg Elbow or the Stainless Steel Threaded 45 Deg Elbow could be used interchangeably. Npt Threaded Elbow comes under the national standards. Threaded Elbow Weight can differ with type and material; the Threaded Long Radius Elbow is heavier because of the longer radius. Ss Threaded 45 Degree Elbow is mostly used in low pressure systems. Short Radius Threaded 45 Degree Elbow has a shorter radius and is useful in narrow space operations. A105 Threaded 45 Degree Elbow is made up of A105 alloy and it is much corrosion resistant but the Brass Threaded 45 Degree Elbow is resistant to chloride ion corrosion cracking. In applications where the requirement mandates, the Threaded Conduit Elbow, the Gi Threaded Elbow or the type Elbow Threaded Grooved can be used.
EIL Approved Carbon Steel 45 Degree NPT Elbow Manufacturer In India, Temperature Ratings Of 45° Threaded Reducing Elbows.
Npt 45 Degree Street Elbow Brass are made up of brass to reduce corrosion and to make them low cost to be applied in low cost systems. Threaded Elbow Class 150 and the Threaded Elbow Class 3000 are two examples of their pressure classes.
ASME B16.11 Elbow Dimensions
Class 2000 Threaded 45 Elbow Dimensions
| Normal Pipe Sizes | Minimum Length of Thread |
Outside Diameter of Band |
Minimum Weight |
Center to End | |
| B | J | D | G | 45° C |
|
| 1/2 | 10.9 | 13.6 | 33 | 3.18 | 22 |
| 3/4 | 12.7 | 13.9 | 38 | 3.18 | 25 |
| 1 | 14.7 | 17.3 | 46 | 3.68 | 28 |
| 1.1/4 | 17 | 18 | 56 | 3.89 | 33 |
| 1.1/2 | 17.8 | 18.4 | 62 | 4.01 | 35 |
| 2 | 19 | 19.2 | 75 | 4.27 | 43 |
| 2.1/2 | 23.6 | 28.9 | 92 | 5.61 | 52 |
| 3 | 25.9 | 30.5 | 109 | 5.99 | 64 |
| 4 | 27.7 | 33 | 146 | 6.55 | 79 |
Class 3000 Threaded 45 Elbow Dimensions
| Normal Pipe Size | Minimum Length of Thread |
O.D. Outside Daimeter of Band |
Minimum Weight |
Center to End | |
| B | J | D | G | 45 Degree C |
|
| 1/2 | 10.9 | 13.6 | 38 | 4.09 | 25 |
| 3/4 | 12.7 | 13.9 | 46 | 4.32 | 28 |
| 1 | 14.7 | 17.3 | 56 | 4.98 | 33 |
| 1.1/4 | 17 | 18 | 62 | 5.28 | 35 |
| 1.1/2 | 17.8 | 18.4 | 75 | 5.56 | 43 |
| 2 | 19 | 19.2 | 84 | 7.14 | 44 |
| 2.1/2 | 23.6 | 28.9 | 102 | 7.65 | 52 |
| 3 | 25.9 | 30.5 | 121 | 8.84 | 64 |
| 4 | 27.7 | 33 | 152 | 11.18 | 79 |
ANSI / ASME B16.11 Screwed Elbow Available in A Wide Range Of Grades Or Shape And Material.
Class 6000 Threaded 45 Elbow Dimensions
| Normal Pipe Sizes | Minimum Length of Thread |
Outside Daimeter of Band |
Minimum Weight |
Center to End | |
| B | J | D | G | 45 Degree C |
|
| 1/2 | 10.9 | 13.6 | 46 | 8.15 | 28 |
| 3/4 | 12.7 | 13.9 | 56 | 8.53 | 33 |
| 1 | 14.7 | 17.3 | 62 | 9.93 | 35 |
| 1.1/4 | 17 | 18 | 75 | 10.59 | 43 |
| 1.1/2 | 17.8 | 18.4 | 84 | 11.07 | 44 |
| 2 | 19 | 19.2 | 102 | 12.09 | 52 |
| 2.1/2 | 23.6 | 28.9 | 121 | 15.29 | 64 |
| 3 | 25.9 | 30.5 | 146 | 16.64 | 79 |
| 4 | 27.7 | 33 | 152 | 18.67 | 79 |
Threaded 45 Deg Elbow Price List
| Size | Class | Type Material | Price In India |
| 1 NPS | 6000# | ASTM A105 | 187.47 |
| 1-1/2 NPS | 3000# | ASTM A105 | 76.89 |
| 1/2 NPS | 3000# | ASTM A105N | 78.98 |
| 3/4 NPS | 6000# | ASTM A105N | 120 |
| 2 NPS | 3000# | A06E | 260.5 |
Please note this is an approx Price of 45 Deg Threaded Elbow in India. For final ASME B16.11 Elbow Price List Please Call on +91 - 22 - 67437342 or drop an Email to info@rajtilakmetal.com.
Most Frequent Types Of NPT 3000 LBS Grooved Screwed 45 Degree Elbow, Check Market Price Before You Buy ASME B16.11 45 Degree Threaded Elbows Fittings In Mumbai, India.
Standard Specification Of Stainless Steel Threaded 45 Degree Elbow
| Specification : | 45 Degree Threaded Elbow |
| Standards | MSS SP 79, JIS B2302, MSS-SP-97 (Threadolet), MSS-SP-83 (Union), ASME B16.11 (American Standard), Bs3799, ASME B36.19 (Nipple) |
| Type Of Pipe systems | Equal Cross, Pipe Cap, Branch Outlets, Swage Nipple, 45 Deg Elbow, Equal tee, Full Coupling, Reducing Tee, 90 Deg Elbow, Half Coupling, Street Elbow, Bull Plug, Boss, Union (Male/Female), Lateral Outlet, 45 Lateral Tee. |
| Material | Stainless Steel (ASTM-182) Alloy Steel (ASTM-182) Low Alloy Steel (ASTM-350) Carbon Steel (ASTM-105) Duplex Steel Cooper Nickel |
| Thread Connections | ASME B16.34 (Valves — Flanged), ASME B16.39 (Malleable Iron Pipe Unions, 150#, 250#, Or 300#), ASME B16.11 (Socket Welding and Threaded), MSS-SP-83 (Class Unions), ASME B16.3 (Malleable Iron Fittings), ASME B16.4 ( Gray Iron Fittings), ASME B16.39 (Malleable Iron Unions). |
| Types Of Thread | NPT, BSPP, BSPT, PF, PT, MPT |
| Applications | Oil and Gas Chemical Water Pipeline Noncritical Applications Power station Fire Protection |
| Advantages | Simple Usage Easy installation Economic as cheaper |
| Size | Threaded Fittings = ½” – 4” |
| Pressure Rating | Threaded Fittings = Class 2000, Class 3000, Class 6000 |
45 Degree Npt Elbow Weight Chart
| 2000LBS | NPS | 1/8 | 1/4 | 3/8 | 1/2 | 3/4 | 1 | 1 1/4 | 1 1/2 | 2 | 2 1/2 | 3 | 4 |
| B | – | 29/32 | 1 1/16 | 1 5/16 | 1 9/16 | 1 27/32 | 2 7/32 | 2 1/2 | 3 1/32 | 3 11/16 | 4 5/16 | 5 3/4 | |
| F | – | 3/4 | 3/4 | 1 | 1 1/8 | 1 1/4 | 1 5/16 | 1 3/8 | 1 11/16 | 2 1/16 | 2 1/2 | 3 1/8 | |
| Weight | – | 0.188 | 0.236 | 0.435 | 0.740 | 1.058 | 1.375 | 1.740 | 2.883 | 7.750 | 11.313 | 19.125 | |
| 3000LBS | 1/8 | 1/4 | 3/8 | 1/2 | 3/4 | 1 | 1 1/4 | 1 1/2 | 2 | 2 1/2 | 3 | 4 | |
| B | 29/32 | 1 1/16 | 1 5/16 | 1 9/16 | 1 27/32 | 2 7/32 | 2 1/2 | 3 1/32 | 3 11/32 | 4 | 4 3/4 | 6 | |
| F | 3/4 | 3/4 | 1 | 1 1/8 | 1 1/4 | 1 5/16 | 1 3/8 | 1 11/16 | 1 3/4 | 2 1/16 | 2 1/2 | 3 1/8 | |
| Weight | 0.250 | 0.290 | 0.500 | 0.750 | 1.188 | 1.988 | 2.235 | 3.000 | 4.930 | 7.375 | 13.588 | 19.063 | |
| 6000# | 1/8 | 1/4 | 3/8 | 1/2 | 3/4 | 1 | 1 1/4 | 1 1/2 | 2 | 2 1/2 | 3 | 4 | |
| B | 1 1/6 | 1 5/16 | 1 9/16 | 1 27/32 | 2 7/32 | 2 1/2 | 3 1/32 | 3 11/32 | 4 | 4 3/4 | 5 3/4 | – | |
| F | 3/4 | 1 | 1 1/8 | 1 1/4 | 1 5/16 | 1 3/8 | 1 11/16 | 1 3/4 | 2 1/16 | 2 1/2 | 3 1/8 | – | |
| Weight | 0.250 | 0.640 | 0.500 | 1.438 | 2.188 | 2.785 | 4.688 | 5.750 | 9.500 | 15.000 | 30.563 | – | |
ASME B16.11 Threaded 45 Deg Elbow Pressure Rating
| Threaded 45 Deg Elbow Pressure-Temperature | ||||||
| Temperature | Class | |||||
| 150 | 300 | |||||
| 1/4 - 1 inch. | 1 1/4 - 2 inch. | 2 1/2 - 3 inch. | ||||
| (oF) | (oC) | |||||
| -20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 | |
| 200 | 93 | 265 | 1785 | 1350 | 910 | |
| 250 | 121 | 225 | 1575 | 1200 | 825 | |
| 300 | 149 | 185 | 1360 | 1050 | 735 | |
| 350 | 177 | 150 | 1150 | 900 | 650 | |
| 400 | 204 | - | 935 | 750 | 560 | |
| 450 | 232 | - | 725 | 600 | 475 | |
| 500 | 260 | - | 510 | 450 | 385 | |
| 550 | 288 | - | 300 | 300 | 300 | |
Screwed Elbow Tolerance Chart
| ANSI B16.11 American Standard Dimensional Tolerances | ||
| "A" - Threaded Center To Bottom | For Size 1/8" And 1/4" |
± 0.03" |
| 3/8", 1/2" And 3/4" | ± 0.06" | |
| 1", 1-1/4", 1-1/2" And 2" | ± 0.08" | |
| 2-1/2", 3", And 4" | ± 0.10" | |
| "B" - Threaded Bore Diameter | For Size 1-1/2" And Smaller |
+ 0.020" - 0.000" |
| 2", 2-1/2", 3" And 4" | + 0.025" - 0.000" |
|
| "C" - Threaded Wall Thick. | Min. = 1.09 T (But Not Less Than 5/32") T = Wall Thickness Of Nominal Pipe Sizes |
|
| "D" - Bore Diameter Of Pipe Fitting | For Size 2" And Smaller |
± 0.030" |
| 2-1/2", 3" And 4" | ± 0.060" | |
| "E" - Threadeds- Bottom To Bottom - Full Couplings | For Size 1/8" And 1/4" |
± 0.06" |
| 3/8", 1/2" And 3/4" | ± 0.12" | |
| 1", 1-1/4", 1-1/2" And 2" | ± 0.16" | |
| 2-1/2", 3", And 4" | ± 0.20" | |
| "F" - Bottom Of Threaded To Opposite Face - ANSI B16.11 Half Couplings | For Size 1/8" And 1/4" |
± 0.03" |
| 3/8", 1/2" And 3/4" | ± 0.06" | |
| 1", 1-1/4", 1-1/2" And 2" | ± 0.08" | |
| 2-1/2", 3", And 4" | ± 0.10" | |
| "G" - Gap Of Welding | Approx. 0.06" Before Welding Recommended Gap |
|
| "H" - Min. Flat | Min. Flat = 0.75 X Min. Threaded Wall Thick. |
|
Types Of 45 Degree Threaded Elbow For Sale
1 1/2 Inch, A351 CF8M, Class 150 LB, ANSI B16.11, Screwed Elbow
Class 3000, A182 F304L, 1/2 Inch, NPT, 45 Degree Threaded Elbow
ASME B16.11, 1 1/2 Inch, Class 3000, Npt 45 Deg Street Elbow Brass
2 Inch, 6000LB, A182 F11, B16.11, Threaded Reducing Elbow
1/2 Inch, 3000LB, F304H, ASME B16.11, Internal Threaded Elbow
ASTM A182 F316, 1/2 Inch, 9000LB, FNPT Ends, Threaded Long Radius Elbow
2000LB, ASME B16.11, 2 Inch, Stainless Steel Threaded Elbow
ASTM A105, 1.5 Inch, NPT Ends, Carbon Steel 45 Deg Threaded Elbows
1 inch, Threaded 125#, Black Cast Iron, Seamless 45 Deg Elbows
ASME B16.11, PN400, DN80, Brass Threaded Elbows
Galvanized, ASTM A105, CL3000, 3 Inch, ASME B16.11 45 Deg Threaded Elbows
ASTM A350 LF2, DN20, PN400, Threaded Elbows Class 3000
What Is A Threaded Elbow?
Screwed Elbow are different specific types of elbows. 45 Degree Threaded Elbow differ according to the standards and use cases but their angle is denoted as 45 degree for the change of direction in fluid flow. Threaded Elbow Dimensions mainly depend on the connecting pipes and the radius of the curvature. The standards differ such as the 45 Degree Npt Elbow and the Asme B16.11 Threaded Elbow Fittings. The Asme B16.11 Threaded Elbow Material can differ but the nominal sizes for this standard are up to 4 inches.
45 Degree Threaded Elbow Use In Connecting Pipes?
Threaded 45 Deg Elbow or the 45 Deg Threaded Pipe Elbow has threads to be threaded onto the connecting pipes. In contrast to the most used welding methods, these are connected by threads. Welding is also applied when necessary. The ASME B16.11 Threaded Reducing Elbow has a different function as it reduces the pipe size from one end to the other. Asme B16.11 Gi Threaded Elbow is made up of GI material which is much corrosion resistant. GI stands for galvanized iron which has a coating over the steel to prevent oxidation. Sometimes the Grooved Threaded 45 Deg Elbow types are used; these have grooves and can install gaskets for extra tightness. Internal Threaded 45 Degree Elbow has threads inside the elbow and the pipe will have threads outside to fit onto this type.
Refer Stainless Steel Threaded 45 Deg Elbow Weight Chart According to Manufacturer Of ANSI B16.11 And NPT 45 Degree Street Elbows In India.
Threaded 45 Deg Elbow Joint, Ms Threaded 45 Deg Elbow or the Stainless Steel Threaded 45 Deg Elbow could be used interchangeably. Npt Threaded Elbow comes under the national standards. Threaded Elbow Weight can differ with type and material; the Threaded Long Radius Elbow is heavier because of the longer radius. Ss Threaded 45 Degree Elbow is mostly used in low pressure systems. Short Radius Threaded 45 Degree Elbow has a shorter radius and is useful in narrow space operations. A105 Threaded 45 Degree Elbow is made up of A105 alloy and it is much corrosion resistant but the Brass Threaded 45 Degree Elbow is resistant to chloride ion corrosion cracking. In applications where the requirement mandates, the Threaded Conduit Elbow, the Gi Threaded Elbow or the type Elbow Threaded Grooved can be used.
EIL Approved Carbon Steel 45 Degree NPT Elbow Manufacturer In India, Temperature Ratings Of 45° Threaded Reducing Elbows.
Npt 45 Degree Street Elbow Brass are made up of brass to reduce corrosion and to make them low cost to be applied in low cost systems. Threaded Elbow Class 150 and the Threaded Elbow Class 3000 are two examples of their pressure classes.
ASME B16.11 Elbow Dimensions
Class 2000 Threaded 45 Elbow Dimensions
| Normal Pipe Sizes | Minimum Length of Thread |
Outside Diameter of Band |
Minimum Weight |
Center to End | |
| B | J | D | G | 45° C |
|
| 1/2 | 10.9 | 13.6 | 33 | 3.18 | 22 |
| 3/4 | 12.7 | 13.9 | 38 | 3.18 | 25 |
| 1 | 14.7 | 17.3 | 46 | 3.68 | 28 |
| 1.1/4 | 17 | 18 | 56 | 3.89 | 33 |
| 1.1/2 | 17.8 | 18.4 | 62 | 4.01 | 35 |
| 2 | 19 | 19.2 | 75 | 4.27 | 43 |
| 2.1/2 | 23.6 | 28.9 | 92 | 5.61 | 52 |
| 3 | 25.9 | 30.5 | 109 | 5.99 | 64 |
| 4 | 27.7 | 33 | 146 | 6.55 | 79 |
Class 3000 Threaded 45 Elbow Dimensions
| Normal Pipe Size | Minimum Length of Thread |
O.D. Outside Daimeter of Band |
Minimum Weight |
Center to End | |
| B | J | D | G | 45 Degree C |
|
| 1/2 | 10.9 | 13.6 | 38 | 4.09 | 25 |
| 3/4 | 12.7 | 13.9 | 46 | 4.32 | 28 |
| 1 | 14.7 | 17.3 | 56 | 4.98 | 33 |
| 1.1/4 | 17 | 18 | 62 | 5.28 | 35 |
| 1.1/2 | 17.8 | 18.4 | 75 | 5.56 | 43 |
| 2 | 19 | 19.2 | 84 | 7.14 | 44 |
| 2.1/2 | 23.6 | 28.9 | 102 | 7.65 | 52 |
| 3 | 25.9 | 30.5 | 121 | 8.84 | 64 |
| 4 | 27.7 | 33 | 152 | 11.18 | 79 |
ANSI / ASME B16.11 Screwed Elbow Available in A Wide Range Of Grades Or Shape And Material.
Class 6000 Threaded 45 Elbow Dimensions
| Normal Pipe Sizes | Minimum Length of Thread |
Outside Daimeter of Band |
Minimum Weight |
Center to End | |
| B | J | D | G | 45 Degree C |
|
| 1/2 | 10.9 | 13.6 | 46 | 8.15 | 28 |
| 3/4 | 12.7 | 13.9 | 56 | 8.53 | 33 |
| 1 | 14.7 | 17.3 | 62 | 9.93 | 35 |
| 1.1/4 | 17 | 18 | 75 | 10.59 | 43 |
| 1.1/2 | 17.8 | 18.4 | 84 | 11.07 | 44 |
| 2 | 19 | 19.2 | 102 | 12.09 | 52 |
| 2.1/2 | 23.6 | 28.9 | 121 | 15.29 | 64 |
| 3 | 25.9 | 30.5 | 146 | 16.64 | 79 |
| 4 | 27.7 | 33 | 152 | 18.67 | 79 |
Threaded 45 Deg Elbow Price List
| Size | Class | Type Material | Price In India |
| 1 NPS | 6000# | ASTM A105 | 187.47 |
| 1-1/2 NPS | 3000# | ASTM A105 | 76.89 |
| 1/2 NPS | 3000# | ASTM A105N | 78.98 |
| 3/4 NPS | 6000# | ASTM A105N | 120 |
| 2 NPS | 3000# | A06E | 260.5 |
Buy Now
Please note this is an approx Price of 45 Deg Threaded Elbow in India. For final ASME B16.11 Elbow Price List Please Call on +91 - 22 - 67437342 or drop an Email to info@rajtilakmetal.com.
Most Frequent Types Of NPT 3000 LBS Grooved Screwed 45 Degree Elbow, Check Market Price Before You Buy ASME B16.11 45 Degree Threaded Elbows Fittings In Mumbai, India.
Standard Specification Of Stainless Steel Threaded 45 Degree Elbow
| Specification : | 45 Degree Threaded Elbow |
| Standards | MSS SP 79, JIS B2302, MSS-SP-97 (Threadolet), MSS-SP-83 (Union), ASME B16.11 (American Standard), Bs3799, ASME B36.19 (Nipple) |
| Type Of Pipe systems | Equal Cross, Pipe Cap, Branch Outlets, Swage Nipple, 45 Deg Elbow, Equal tee, Full Coupling, Reducing Tee, 90 Deg Elbow, Half Coupling, Street Elbow, Bull Plug, Boss, Union (Male/Female), Lateral Outlet, 45 Lateral Tee. |
| Material | Stainless Steel (ASTM-182) Alloy Steel (ASTM-182) Low Alloy Steel (ASTM-350) Carbon Steel (ASTM-105) Duplex Steel Cooper Nickel |
| Thread Connections | ASME B16.34 (Valves — Flanged), ASME B16.39 (Malleable Iron Pipe Unions, 150#, 250#, Or 300#), ASME B16.11 (Socket Welding and Threaded), MSS-SP-83 (Class Unions), ASME B16.3 (Malleable Iron Fittings), ASME B16.4 ( Gray Iron Fittings), ASME B16.39 (Malleable Iron Unions). |
| Types Of Thread | NPT, BSPP, BSPT, PF, PT, MPT |
| Applications | Oil and Gas Chemical Water Pipeline Noncritical Applications Power station Fire Protection |
| Advantages | Simple Usage Easy installation Economic as cheaper |
| Size | Threaded Fittings = ½” – 4” |
| Pressure Rating | Threaded Fittings = Class 2000, Class 3000, Class 6000 |
45 Degree Npt Elbow Weight Chart
| 2000LBS | NPS | 1/8 | 1/4 | 3/8 | 1/2 | 3/4 | 1 | 1 1/4 | 1 1/2 | 2 | 2 1/2 | 3 | 4 |
| B | – | 29/32 | 1 1/16 | 1 5/16 | 1 9/16 | 1 27/32 | 2 7/32 | 2 1/2 | 3 1/32 | 3 11/16 | 4 5/16 | 5 3/4 | |
| F | – | 3/4 | 3/4 | 1 | 1 1/8 | 1 1/4 | 1 5/16 | 1 3/8 | 1 11/16 | 2 1/16 | 2 1/2 | 3 1/8 | |
| Weight | – | 0.188 | 0.236 | 0.435 | 0.740 | 1.058 | 1.375 | 1.740 | 2.883 | 7.750 | 11.313 | 19.125 | |
| 3000LBS | 1/8 | 1/4 | 3/8 | 1/2 | 3/4 | 1 | 1 1/4 | 1 1/2 | 2 | 2 1/2 | 3 | 4 | |
| B | 29/32 | 1 1/16 | 1 5/16 | 1 9/16 | 1 27/32 | 2 7/32 | 2 1/2 | 3 1/32 | 3 11/32 | 4 | 4 3/4 | 6 | |
| F | 3/4 | 3/4 | 1 | 1 1/8 | 1 1/4 | 1 5/16 | 1 3/8 | 1 11/16 | 1 3/4 | 2 1/16 | 2 1/2 | 3 1/8 | |
| Weight | 0.250 | 0.290 | 0.500 | 0.750 | 1.188 | 1.988 | 2.235 | 3.000 | 4.930 | 7.375 | 13.588 | 19.063 | |
| 6000# | 1/8 | 1/4 | 3/8 | 1/2 | 3/4 | 1 | 1 1/4 | 1 1/2 | 2 | 2 1/2 | 3 | 4 | |
| B | 1 1/6 | 1 5/16 | 1 9/16 | 1 27/32 | 2 7/32 | 2 1/2 | 3 1/32 | 3 11/32 | 4 | 4 3/4 | 5 3/4 | – | |
| F | 3/4 | 1 | 1 1/8 | 1 1/4 | 1 5/16 | 1 3/8 | 1 11/16 | 1 3/4 | 2 1/16 | 2 1/2 | 3 1/8 | – | |
| Weight | 0.250 | 0.640 | 0.500 | 1.438 | 2.188 | 2.785 | 4.688 | 5.750 | 9.500 | 15.000 | 30.563 | – | |
ASME B16.11 Threaded 45 Deg Elbow Pressure Rating
| Threaded 45 Deg Elbow Pressure-Temperature | ||||||
| Temperature | Class | |||||
| 150 | 300 | |||||
| 1/4 - 1 inch. | 1 1/4 - 2 inch. | 2 1/2 - 3 inch. | ||||
| (oF) | (oC) | |||||
| -20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 | |
| 200 | 93 | 265 | 1785 | 1350 | 910 | |
| 250 | 121 | 225 | 1575 | 1200 | 825 | |
| 300 | 149 | 185 | 1360 | 1050 | 735 | |
| 350 | 177 | 150 | 1150 | 900 | 650 | |
| 400 | 204 | - | 935 | 750 | 560 | |
| 450 | 232 | - | 725 | 600 | 475 | |
| 500 | 260 | - | 510 | 450 | 385 | |
| 550 | 288 | - | 300 | 300 | 300 | |
Screwed Elbow Tolerance Chart
| ANSI B16.11 American Standard Dimensional Tolerances | ||
| "A" - Threaded Center To Bottom | For Size 1/8" And 1/4" |
± 0.03" |
| 3/8", 1/2" And 3/4" | ± 0.06" | |
| 1", 1-1/4", 1-1/2" And 2" | ± 0.08" | |
| 2-1/2", 3", And 4" | ± 0.10" | |
| "B" - Threaded Bore Diameter | For Size 1-1/2" And Smaller |
+ 0.020" - 0.000" |
| 2", 2-1/2", 3" And 4" | + 0.025" - 0.000" |
|
| "C" - Threaded Wall Thick. | Min. = 1.09 T (But Not Less Than 5/32") T = Wall Thickness Of Nominal Pipe Sizes |
|
| "D" - Bore Diameter Of Pipe Fitting | For Size 2" And Smaller |
± 0.030" |
| 2-1/2", 3" And 4" | ± 0.060" | |
| "E" - Threadeds- Bottom To Bottom - Full Couplings | For Size 1/8" And 1/4" |
± 0.06" |
| 3/8", 1/2" And 3/4" | ± 0.12" | |
| 1", 1-1/4", 1-1/2" And 2" | ± 0.16" | |
| 2-1/2", 3", And 4" | ± 0.20" | |
| "F" - Bottom Of Threaded To Opposite Face - ANSI B16.11 Half Couplings | For Size 1/8" And 1/4" |
± 0.03" |
| 3/8", 1/2" And 3/4" | ± 0.06" | |
| 1", 1-1/4", 1-1/2" And 2" | ± 0.08" | |
| 2-1/2", 3", And 4" | ± 0.10" | |
| "G" - Gap Of Welding | Approx. 0.06" Before Welding Recommended Gap |
|
| "H" - Min. Flat | Min. Flat = 0.75 X Min. Threaded Wall Thick. |
|
Types Of 45 Degree Threaded Elbow For Sale
1 1/2 Inch, A351 CF8M, Class 150 LB, ANSI B16.11, Screwed Elbow
Class 3000, A182 F304L, 1/2 Inch, NPT, 45 Degree Threaded Elbow
ASME B16.11, 1 1/2 Inch, Class 3000, Npt 45 Deg Street Elbow Brass
2 Inch, 6000LB, A182 F11, B16.11, Threaded Reducing Elbow
1/2 Inch, 3000LB, F304H, ASME B16.11, Internal Threaded Elbow
ASTM A182 F316, 1/2 Inch, 9000LB, FNPT Ends, Threaded Long Radius Elbow
2000LB, ASME B16.11, 2 Inch, Stainless Steel Threaded Elbow
ASTM A105, 1.5 Inch, NPT Ends, Carbon Steel 45 Deg Threaded Elbows
1 inch, Threaded 125#, Black Cast Iron, Seamless 45 Deg Elbows
ASME B16.11, PN400, DN80, Brass Threaded Elbows
Galvanized, ASTM A105, CL3000, 3 Inch, ASME B16.11 45 Deg Threaded Elbows
ASTM A350 LF2, DN20, PN400, Threaded Elbows Class 3000
What Is A Threaded Elbow?
Screwed Elbow are different specific types of elbows. 45 Degree Threaded Elbow differ according to the standards and use cases but their angle is denoted as 45 degree for the change of direction in fluid flow. Threaded Elbow Dimensions mainly depend on the connecting pipes and the radius of the curvature. The standards differ such as the 45 Degree Npt Elbow and the Asme B16.11 Threaded Elbow Fittings. The Asme B16.11 Threaded Elbow Material can differ but the nominal sizes for this standard are up to 4 inches.
45 Degree Threaded Elbow Use In Connecting Pipes?
Threaded 45 Deg Elbow or the 45 Deg Threaded Pipe Elbow has threads to be threaded onto the connecting pipes. In contrast to the most used welding methods, these are connected by threads. Welding is also applied when necessary. The ASME B16.11 Threaded Reducing Elbow has a different function as it reduces the pipe size from one end to the other. Asme B16.11 Gi Threaded Elbow is made up of GI material which is much corrosion resistant. GI stands for galvanized iron which has a coating over the steel to prevent oxidation. Sometimes the Grooved Threaded 45 Deg Elbow types are used; these have grooves and can install gaskets for extra tightness. Internal Threaded 45 Degree Elbow has threads inside the elbow and the pipe will have threads outside to fit onto this type.
Refer Stainless Steel Threaded 45 Deg Elbow Weight Chart According to Manufacturer Of ANSI B16.11 And NPT 45 Degree Street Elbows In India.
Threaded 45 Deg Elbow Joint, Ms Threaded 45 Deg Elbow or the Stainless Steel Threaded 45 Deg Elbow could be used interchangeably. Npt Threaded Elbow comes under the national standards. Threaded Elbow Weight can differ with type and material; the Threaded Long Radius Elbow is heavier because of the longer radius. Ss Threaded 45 Degree Elbow is mostly used in low pressure systems. Short Radius Threaded 45 Degree Elbow has a shorter radius and is useful in narrow space operations. A105 Threaded 45 Degree Elbow is made up of A105 alloy and it is much corrosion resistant but the Brass Threaded 45 Degree Elbow is resistant to chloride ion corrosion cracking. In applications where the requirement mandates, the Threaded Conduit Elbow, the Gi Threaded Elbow or the type Elbow Threaded Grooved can be used.
EIL Approved Carbon Steel 45 Degree NPT Elbow Manufacturer In India, Temperature Ratings Of 45° Threaded Reducing Elbows.
Npt 45 Degree Street Elbow Brass are made up of brass to reduce corrosion and to make them low cost to be applied in low cost systems. Threaded Elbow Class 150 and the Threaded Elbow Class 3000 are two examples of their pressure classes.
ASME B16.11 Elbow Dimensions
Class 2000 Threaded 45 Elbow Dimensions
| Normal Pipe Sizes | Minimum Length of Thread |
Outside Diameter of Band |
Minimum Weight |
Center to End | |
| B | J | D | G | 45° C |
|
| 1/2 | 10.9 | 13.6 | 33 | 3.18 | 22 |
| 3/4 | 12.7 | 13.9 | 38 | 3.18 | 25 |
| 1 | 14.7 | 17.3 | 46 | 3.68 | 28 |
| 1.1/4 | 17 | 18 | 56 | 3.89 | 33 |
| 1.1/2 | 17.8 | 18.4 | 62 | 4.01 | 35 |
| 2 | 19 | 19.2 | 75 | 4.27 | 43 |
| 2.1/2 | 23.6 | 28.9 | 92 | 5.61 | 52 |
| 3 | 25.9 | 30.5 | 109 | 5.99 | 64 |
| 4 | 27.7 | 33 | 146 | 6.55 | 79 |
Class 3000 Threaded 45 Elbow Dimensions
| Normal Pipe Size | Minimum Length of Thread |
O.D. Outside Daimeter of Band |
Minimum Weight |
Center to End | |
| B | J | D | G | 45 Degree C |
|
| 1/2 | 10.9 | 13.6 | 38 | 4.09 | 25 |
| 3/4 | 12.7 | 13.9 | 46 | 4.32 | 28 |
| 1 | 14.7 | 17.3 | 56 | 4.98 | 33 |
| 1.1/4 | 17 | 18 | 62 | 5.28 | 35 |
| 1.1/2 | 17.8 | 18.4 | 75 | 5.56 | 43 |
| 2 | 19 | 19.2 | 84 | 7.14 | 44 |
| 2.1/2 | 23.6 | 28.9 | 102 | 7.65 | 52 |
| 3 | 25.9 | 30.5 | 121 | 8.84 | 64 |
| 4 | 27.7 | 33 | 152 | 11.18 | 79 |
ANSI / ASME B16.11 Screwed Elbow Available in A Wide Range Of Grades Or Shape And Material.
Class 6000 Threaded 45 Elbow Dimensions
| Normal Pipe Sizes | Minimum Length of Thread |
Outside Daimeter of Band |
Minimum Weight |
Center to End | |
| B | J | D | G | 45 Degree C |
|
| 1/2 | 10.9 | 13.6 | 46 | 8.15 | 28 |
| 3/4 | 12.7 | 13.9 | 56 | 8.53 | 33 |
| 1 | 14.7 | 17.3 | 62 | 9.93 | 35 |
| 1.1/4 | 17 | 18 | 75 | 10.59 | 43 |
| 1.1/2 | 17.8 | 18.4 | 84 | 11.07 | 44 |
| 2 | 19 | 19.2 | 102 | 12.09 | 52 |
| 2.1/2 | 23.6 | 28.9 | 121 | 15.29 | 64 |
| 3 | 25.9 | 30.5 | 146 | 16.64 | 79 |
| 4 | 27.7 | 33 | 152 | 18.67 | 79 |
Threaded 45 Deg Elbow Price List
| Size | Class | Type Material | Price In India |
| 1 NPS | 6000# | ASTM A105 | 187.47 |
| 1-1/2 NPS | 3000# | ASTM A105 | 76.89 |
| 1/2 NPS | 3000# | ASTM A105N | 78.98 |
| 3/4 NPS | 6000# | ASTM A105N | 120 |
| 2 NPS | 3000# | A06E | 260.5 |
Buy Now
Please note this is an approx Price of
